User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter Description
Base station ID The identifier of the base station.
Transmit power
The signal level at the output of the modem's receiver.
Frequency The frequency of the signal transmitted by the modem's receiver.
Connect
Click the button to connect to the WiMAX network. Beforehand,
you need to create a WAN connection with relevant parameters (see
the Creating WiMAX WAN Connection section, page 30).
The button is displayed when the connection is not established.
Disconnect
Click the button to disconnect from the WiMAX network.
The button is displayed when the connection is established or is
being established.
To save the values of the SSID and Diode on modem field, click the Connect button.
Page 94 of 108