User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Type
The type of the VLAN which identifier is specified in the VLAN ID
field.
Local. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings.
NAT. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. Later the
VLAN which identifier is specified in the VLAN ID field is used to
create a WAN connection of the IPoE or PPPoE type (on the Net /
Connections page).
Transparent. The group of this type is a transparent connection
between an internal port and an external connection. It is mostly used
to connect IPTV set-top boxes.
VLAN ID
An identifier of the VLAN to which this group of ports will be
assigned.
Ports
Port
From the list, select an available value (a physical port of the router,
the wireless interface, or, if the wireless network is spitted into parts,
a part of the wireless network) to assign it to this group. The port will
be displayed in the table at the bottom of the page.
QoS
A priority tag for the traffic transmitted through the port highlighted
in the table at the bottom of the page.
Tag
Select a value for the port highlighted in the table at the bottom of the
page:
• tagged,
• untagged.
Click the Save changes button.
Click the Delete port button to delete the port highlighted in the table at the bottom of the page.
Click the Delete VLAN button to delete this group of ports form the system.
!
For further use of groups of ports for VLAN it is required to save the changed settings to
the non-volatile memory of the router and reboot it (click the Save&Reboot line in the
top-page menu displayed when the mouse pointer is over the System caption).
Page 72 of 108