User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Creating WiMAX WAN Connection
You can create a connection of this type only when a WiMAX USB modem is connected to the
router. Select the WAN connection on the Net / Connections page. On the opened page, select
the USB-WIMAX value from the Physical interface drop-down list and specify the needed
values.
Figure 21. The page for creating a new connection. The General settings and Physical layer sections.
Parameter Description
General settings
Name A name for connection for easier identification.
Connection Type Select the IPoE value.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Physical layer
MTU
The maximum size of units transmitted by the interface.
MAC
A MAC address assigned to the interface. By default, the MAC
address of your WiMAX USB modem is specified in the field.
Page 30 of 108