User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active
when the router's DHCP server is enabled.
Figure 20. The tab for configuring MAC-IP pairs.
To create a MAC-IP pair (set a fixed IP address in the local area network for a device with a certain
MAC address), click the Add button.
You can specify the following parameters:
Parameter Description
IP address
An IP address which will be assigned to the device with the
specified MAC address.
MAC address
The MAC address of the device from the LAN.
Host name A network name of the device for easier identification. Optional.
Click the Save button.
Existing MAC-IP pairs are displayed on the Static DHCP tab. To remove a pair, select the
relevant line in the table and click the Remove button. Then click the Save button.
Page 29 of 108