User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter Description
General settings
Name A name for this connection.
Connection Type The type of network protocol used by this connection – IPoE.
Enable The checkbox enabling this connection.
Direction
The direction of this connection.
Physical layer
Physical interface
The physical interface to which this connection is assigned.
IP settings
IP Address
The router's IP address. By default, the following value is specified:
192.168.0.1.
Netmask
The subnet mask. By default, the following value is specified:
255.255.255.0.
Interface
The name assigned to the connection by the system.
When all needed settings are configured, click the Save button.
On the DHCP server tab, you can configure the built-in DHCP sever of the router.
Figure 19. The tab for configuring the DHCP server.
Page 27 of 108