User's Manual
46D-Link DIR-300 User Manual
Section 3 - Conî‚¿guration
System Check
VCT is an advanced feature that integrates a LAN
cable tester on every Ethernet port on the router.
Through the graphical user interface (GUI), VCT
can be used to remotely diagnose and report cable
faults such as opens, shorts, swaps, and impedance
mismatch. This feature significantly reduces
service calls and returns by allowing users to easily
troubleshoot their cable connections.
The Ping Test is used to send Ping packets to test if
a computer is on the Internet. Enter the IP Address
that you wish to Ping, and click Ping.
Virtual Cable
Tester (VCT)
Info:
Ping Test:
This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be used to test
the status of the Internet.