User's Manual

43D-Link DIR-300 User Manual
Section 3 - Conguration
Save and Restore
Use this option to save the current router conguration
settings to a le on the hard disk of the computer you
are using. First, click the Save button. You will then
see a le dialog, where you can select a location and
le name for the settings.
Use this option to load previously saved router
conguration settings. First, use the Browse control
to nd a previously save le of conguration settings.
Then, click the Upload Settings button to transfer
those settings to the Router.
This option will restore all conguration settings
back to the settings that were in effect at the time
the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router conguration settings, use the Save
button above.
Click the Reboots button on the left side of the
window to restart the Router.
Save Settings
to Local Hard
Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboots:
This window allows you to save your conguration le to a hard drive, load conguration settings from a hard drive, and restore
the Router’s factory default settings.