User's Manual

42D-Link DIR-300 User Manual
Section 3 - Conguration
Enter a new Login Name for the Administrator
account.
Enter a new password for the Administrator Login
Name and then retype the new password in the
Conrm Password textbox. The administrator can
make changes to the settings.
Remote management allows the DIR-300 to be
congured from the Internet by a web browser. A
username and password is still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in web
pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from the
remote (Internet) host.
The Internet IP address of the computer that has access to the Broadband Router. If you input an asterisk (*) into this eld, then any
computer will be able to access the Router. Putting an asterisk (*) into this eld would present a security risk and is not recommended.
The port number used to access the DIR-300. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the DIR-300
and 8080 is the port used for the Web-Management interface.
Administrator
Login Name:
Administrator
Password:
Enable Remote
Management:
IP Allowed to
Access:
Port:
Device Administration
This window will allow you to change the Administrator password. You can also enable Remote Management.