User's Manual
28D-Link DIR-300 User Manual
Section 3 - Conguration
1. To enable wireless security on the Router, use the drop-
down menu to select the desired option. To enable WEP,
select Enable WEP Wireless Security (basic).
2. Next to Authentication, select either Open or Shared
Key. Shared Key provides greater security.
3. Select either 64Bit or 128Bit encryption from the drop-
down menu next to WEP Encryption.
4. Next to Default Key Type, select WEP Key 1 and enter
a WEP key that you create. Make sure you enter this key
exactly on all your wireless devices. You may enter up
to four different keys either using Hex or ASCII. Hex
is recommended (letters A-F and numbers 0-9 are valid).
In ASCII all numbers and letters are valid.
5. Click Save Settings to save your settings. If you are
conguring the Router with a wireless adapter, you
will lose connectivity until you enable WEP on your
adapter and enter the same WEP key as you did on the
Router.
Security Mode:
NOTE:
It is recommended to enable encryption on your wireless Router before
your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when
enabling encryption due to the added overhead.