Specifications

64D-Link DIR-130 User Manual
Appendix B - Technical Specifications
Default Factory Settings
When you receive your router, the default factory settings are in effect as listed in the table below. You may change
any of the network settings. If you perform a reset (hold the reset button on the back of the unit), the router will reset
with the following settings:
Setting Default Value
Username admin
Password (leave blank)
LAN IP Address 192.168.0.1
DHCP Server Enabled
DHCP IP Range 192.168.0.100 - 192.168.0.150
Filtering / Virtual Server / DMZ / Applications Disabled