Operation Manual

8D-Link DIR-100 User Manual
Section 1 - Product Overview
Reset
Used to restore the DIR-100 back
to factory default settings.
Rear Panel
*All ports (both LAN & WAN) are Auto-MDIX. All ports auto-sense cable types to accommodate Straight-through or
Cross-over cable.
Power
Connect one end of your included
power adapter to the power port and
the other end into your power outlet.
LAN PORTS* 1-4
LAN ports which may be uplinked
using a CAT5 Ethernet RJ-45 cable. The
corresponding LEDs on the front panel will
light green when one of these ports are
connected to an end node such as a hub,
switch or computer equipped with a network
adapter card (NIC).
WAN*
This port is where the user is to connect the
Ethernet cable from an outside source that is
taking the connection from your local ISP.