Operation Manual

51D-Link DIR-100 User Manual
Appendix A - Assigning a Static IP Address
Assigning a Static IP Address
(for Windows
®
2000/XP)
Note: Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP
(Dynamic Host Conguration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not
need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:
• Go to
Start
• Double-click
on Control Panel
• Double-click
on Network Connections