Operation Manual

34D-Link DIR-100 User Manual
Section 3 - Configuration
Enter the new password for the Administrator login.
The administrator can make changes to the settings.
Remote management allows the DIR-100 to be
configured from the Internet by a web browser. A
username and password is still required to access the
Web-Management interface. In general, only a member
of your network can browse the built-in web pages
to perform Administrator tasks. This feature enables
you to perform Administrator tasks from the remote
(Internet) host.
The port number used to access the DIR-100.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the
WAN IP address of the DIR-100 and 8080 is the port
used for the Web-Management interface.
Administrator
Password:
Remote
Management:
Port:
Tools
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two
accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write
access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has
the ability to change both admin and user account passwords.