Operation Manual

29D-Link DIR-100 User Manual
Section 3 - Configuration
Access Control
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing
the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected
to the Broadband Router.
Select Disable MAC filters, allow MAC addresses listed
below, or deny MAC addresses listed below.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Configure MAC
Filter:
MAC Address:
DHCP Client: