User's Manual

Factory Reset button. Refer to the following table for the meaning of each

feature.

Power Used to connect to the power outlet. Only use the power adapter

provided with the DI-804

WAN The RJ-45 Ethernet port labeled WAN is used to connect your

DI-804 to your DSL or Cable modem.

Console Port used to connect an external analog backup modem.

Reset Resets the configuration to default settings.

LAN The RJ-45 Ethernet port used to connect your hub, switch, or

PC using Ethernet cables to your DI-804.

Uplink/

Normal

Used to change the operation of Port #1. If uplink is selected,

Port 1 should be connected to a hub or switch. Use the Normal

setting to connect to a client PC.