User Manual Part 1

Using the Configuration Menu

Advanced > Performance > 802.11a

Apply- click Apply to save the changes

DTIM interval-

(Delivery Traffic Indication Message) 1 is the default setting. A

DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages.

RTS Threshold-

this value should remain at its default setting of 2342. If incon-

sistent data flow is a problem, only a minor modification should

be made.

Beacon interval-

beacons are packets sent by the DI-764 to synchronize a wire-

less network. Specify a value. 100 is the default setting and is

recommended.

Data Rate-

best is the default selection

Transmit Power-

full is the default selection.

Wireless

Performance-

select 802.11a or 802.11b+. Here, 802.11a has been

chosen. This screen displays the wireless performance

features of the Access Point portion of the DI-764.

Fragmentation-

this value should also remain at its default setting of 2346. If

you experience a high packet error rate, you may slightly in-

crease your Fragmentation value within the range of 256-2346.

Setting the Fragmentation value too low may result in poor per-

formance.

Shared Key -

in this mode, in order to access the DI-764 on the network, the

device must be listed in the MAC Address Control List

Open System -

the DI-764 will be visible to all devices on the network. This is

the default setting

Authentication-

select Open system or Shared Key