User Manual Part 1

Home > Wireless > 802.11a

Using the Configuration Menu

SSID-

Channel-

Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11a is selected.

“default” is the default setting. All devices on the network must

share the same SSID. If you change the default setting, the

SSID may be up to 32 characters long.

52 is the default channel for 802.11a. All devices on the net-

work must share the same channel.

Hexadecimal digits consist of the numbers 0-9 and the letters A-F

ASCII (American Standard Code for Information Interchange) is a code for

representing English letters as numbers from 0-127

Apply-

click Apply to save the changes.

Keys 1-4-

input up to 4 WEP keys; select the one you wish to use.

Key Type-

select HEX or ASCII

WEP Encryption-

select the level of encryption desired: 64, 128 or 152-bit

WEP-

select Enabled or Disabled. Disabled is the default setting.

Turbo Mode-

select ON or OFF. The default setting is OFF.

If you enable Turbo mode on the DI-764, make sure to also enable Turbo

mode on all 802.11a wireless clients or a wireless connection will not be

established.

WEP (Wired Equivalent Privacy) If you enable encryption on the DI-764

make sure to also enable encryption on all 802.11a wireless clients or

wireless connection will not be established.