User Manual

Using the Configuration Menu

Advanced > Performance > 802.11b+

Basic Rates-

Choose from1-2Mbps; 1,2,5.5,11 Mbps; or 1,2,5.5,11,22 Mbps

DTIM interval-

(Delivery Traffic Indication Message) 3 is the default setting. A

DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages.

TX Rates-

Select the basic transfer rates based on the speed of the wire-

less adapters on the WLAN (wireless local area network);

choose from among the same ranges as those listed in the Basic

Rates,above.

Beacon interval-

Beacons are packets sent by the DI-754 to synchronize a wire-

less network. Specify a value. 100 is the default setting and is

recommended.

RTS Threshold-

Request To Send threshold measures the value in bytes. Any

packet size exceeding 2432 will trigger the DI-754 to use RTS/

CTS mechanism for transmission.

Wireless

Performance-

Select 802.11a or 802.11b+. 802.11b+ is selected here. Dis-

played in this window are the Wireless Performance features

for the Access Point portion of the DI-754.

Fragmentation-

This value should also remain at its default setting of 2346. The

Fragmentation threshold, which is specified in bytes, determines

whether packets will be fragmented. Packets exceeding the

2346 byte setting will be fragmented before transmission.