User Manual

Using the Configuration Menu

Advanced > Performance > 802.11a

Wireless

Performance-

select 802.11a or 802.11b+. Here, 802.11a has been

chosen. This screen displays the wireless performance

features of the Access Point portion of the DI-754.

Fragmentation-

this value should also remain at its default setting of 2346. The

Fragmentation threshold, which is specified in bytes, determines

whether packets will be fragmented. Packets exceeding the

2346 byte setting will be fragmented before transmission.

RTS Threshold-

Request to Send threshold measures the value in bytes. Any

packet size exceeding 2346 will trigger the DI-754 to use RTS/

CTS mechanism for transmission.

Beacon interval-

beacons are packets sent by an Access Point to synchronize a

wireless network. Specify a value. 100 is the default setting

and is recommended.

Data Rate-

best is the default selection

Transmit Power-

full is the default selection.

Shared Key -

in this mode, in order to access the DI-754 on the network, the

device must be listed in the MAC Address Control List

Apply- click Apply to save the changes

Open System -

the DI-754 will be visible to all devices on the network. This is

the default setting

Authentication-

select Open system or Shared Key

DTIM interval-

(Delivery Traffic Indication Message) 1 is the default setting. A

DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages.