User Manual

Using the Configuration Menu

Advanced > Filters > MAC Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)

computers by their MAC addresses from accessing the Internet. You can either

manually add a MAC address or select the MAC address from the list of clients that

are currently connected to the Broadband Router.

MAC Filters-

choose Disable MAC filters; allow MAC addresses listed be-

low; or deny MAC addresses listed below.

Filters-

select the filter you wish to use; in this case, MAC filters was

chosen.

Name-

enter the name here.

MAC Address-

enter the MAC Address.

DHCP Client-

select a DHCP client from the pull-down list; click Clone to copy

that MAC Address

Apply-

click Apply to save the changes.