D-LINK AirPro DI-754 5 GHz Multimode Wireless Router Manual (02/02/2005) Building Networks for People
Contents Package Contents ................................................................................3 Introduction............................................................................................4 Wireless Basics ....................................................................................6 Getting Started ....................................................................................10 Using the Configuration Menu..............................................................
Package Contents Contents of Package: D-Link AirPro DI-754 5GHz Multimode Wireless Broadband Router Power Adapter – 5V DC, 3A Manual and Warranty on CD Quick Installation Guide Ethernet Cable (CAT5 UTP/Straight Through) Note: Using a power supply with a different voltage rating than the one included with the DI-754 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.
Introduction D-Link introduces the 802.11a wireless broadband router with optional 802.11b connection (using the D-Link AirPlus DWL-650+ Cardbus Adapter), as part of the D-Link AirPro series of wireless networking products. The new D-Link AirPro DI-754 Multimode Wireless Router serves both 802.11a wireless networks at 54 Mbps (72 Mbps in Turbo mode*) and 802.11b wireless networks (when used with the installed D-Link AirPlus DWL-650+ Cardbus Adapter) at 11Mbps (22 Mbps with D-Link AirPlus products.
With its web-based interface for easy integration into an existing network (accessible from most Internet browser applications), the DI-754 works with popular operating systems including Macintosh, Linux and Windows. This Manual is designed to help you connect the DI-754 into an existing 802.11a or 802.11b wireless network. Please take a look at the Getting Started section in this manual to see an example of an Infrastructure network using the DI-754.
LEDS LED stands for Light-Emitting Diode. The DI-754 has 5 Green LEDs as shown below: LED Power LED Activity A steady light indicates a connection to a power source M1 A solid light indicates that the DI-754 is ready M2 A solid light indicates that the unit is defective WAN A solid light indicates connection on the WAN port. This LED blinks during data transmission. WLAN 802.11a A solid light indicates that the 802.11a wireless segment is ready. The LED blinks during 802.
Wireless Basics (continued) to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
Wireless Basics (continued) The DI-754 is compatible with other D-Link AirPro 802.11a products, which include: ♦ 5GHz Wireless Cardbus Adapters used with laptop computers (DWL-A650) ♦ 5GHz Wireless PCI Adapters used with desktop computers (DWL-A520) The DI-754 is also compatible with the D-Link AirPlus 802.11b wireless family (when you install the DWL-650+ into the expansion slot), which includes: ♦ Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop computers (DWL-650+) ♦ Enhanced 2.
Wireless Basics (continued) Installation Considerations The D-Link AirPro DI-754 lets you access your network, using a wireless connection, from virtually anywhere. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Getting Started Right out of the box, with its default settings, the DI-754 will connect with other D-Link AirPro products. With a single IP Address from your Broadband Internet Service provider you can share the Internet with all the computers on your local network, without sacrificing speed or security, using D-Link DI-754 Wireless Router. IP ADDRESS Note: If you are using a DHCP-capable router in your network setup, such as the DI-754, you will not need to assign a static IP Address.
Getting Started Please refer to the following sections of this manual for additional information about setting up a network: Networking Basics - learn how to check and assign your IP Address; share printers and files. Using the Configuration Menu - learn the settings for the DI-754, using the webbased interface. 1 2 3 4 DI-754 Router with optional DWL-650+ Troubleshooting - learn how to check for common installation issues and other tips for troubleshooting.
Using the Configuration Menu Before you configure the DI-754, you will run the Setup Wizard by inserting the CD-ROM that came with the DI-754 and clicking on Configure the DI754. (Please see the Quick Installation Guide that came with the product.) After you have completed the Setup Wizard you can access the Configuration menu at any time by opening the web browser and typing in the IP Address of the DI-754.
Using the Configuration Menu Home > Wireless > 802.11a Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11a is selected. SSID- by default the SSID is set to default. All devices on the network must share the same SSID. If you change the default setting, the SSID may be up to 32 characters long. Channel- 52 is the default channel for 802.11a. All devices on the network must share the same channel. Note: Wireless adapters will automatically scan and match the channel of the Access Point.
Using the Configuration Menu Home > Wireless > 802.11b+ Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11b+ is selected. SSID- “default” is the default setting. All devices on the network must share the same SSID. The SSID may be up to 32 characters long. Channel- 6 is the default channel for 802.11b+. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.) WEP- select Enabled or Disabled.
Using the Configuration Menu Home > WAN > Dynamic IP Address DI-754 Dynamic IP Address- most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name- this is optional, but may be required by some ISPs. The default host name is the device name of the Router and may be changed. MAC Address- the default MAC Address is set to the WAN’s physical interface MAC address on the Router.
Using the Configuration Menu Home > WAN > Static IP Address Static IP Address- select this option to set static IP information provided to you by your ISP. IP Address- input the IP Address provided by your ISP Subnet Mask- input your Subnet mask. (All devices in the network must have the same subnet mask.) ISP Gateway Address- input the Gateway address Primary DNS Address- input the address provided by your ISP Secondary DNS Address- this is optional Apply- click Apply to save the changes.
Using the Configuration Menu Home > WAN > PPPoE Please be sure to remove any existing PPPoE client software installed on your computers. PPPoE- Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) Dynamic PPPoE- receive an IP Address automatically from your ISP. or Static PPPoE-you have an assigned (static) IP Address. User Name- your PPPoE username provided by your ISP. Password- your PPPoE password provided by your ISP.
Using the Configuration Menu Home > WAN > PPPoE continued Primary DNS Addressget this info from your ISP Secondary optional DNS AddressMaximum Idle Time- enter a maximum idle time during which internet connection is maintained during inactivity. To disable this feature, enter zero or enable Auto-reconnect. MTU- Maximum Transmission Unit-1492 is default-you may need to change the MTU to conform with your ISP.
Using the Configuration Menu Home > DHCP DI-754 DHCP stands for Dynamic Host Control Protocol. The DI-754 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-754.
Using the Configuration Menu Advanced > Virtual Server The DI-754 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-754 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DI-754 are invisible to the outside world.
Using the Configuration Menu Advanced > Virtual Server continued The DI-754 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service.
Using the Configuration Menu Advanced > Virtual Server continued Click on this icon to edit the virtual service Click on this icon to delete the virtual service Example #2: If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP. Name: FTP Server Private IP: 192.168.0.
Using the Configuration Menu Advanced > Applications Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-754.
Using the Configuration Menu Advanced > Filters > IP Filters Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-754 can be setup to deny internal computers by their IP or MAC addresses. The DI-754 can also block users from accessing restricted web sites. IP Filters use IP Filters to deny LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for the specific IP address.
Using the Configuration Menu Advanced > Filters > URL Blocking URL Blocking is used to deny LAN computers from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. Filters- select the filter you wish to use; in this case, URL Blocking was chosen. URL Blocking- select Enabled or Disabled.
Using the Configuration Menu Advanced > Filters > MAC Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Internet. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Filters- select the filter you wish to use; in this case, MAC filters was chosen.
Using the Configuration Menu Advanced > Filters > Domain Blocking Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp. It can also allow computers to access specific sites and deny all other sites. FiltersDomain Blocking: select the filter you wish to use; in this case, Domain Blocking was chosen.
Using the Configuration Menu Advanced > Firewall DI-754 Firewall Rules is an advance feature used to deny or allow traffic from passing through the DI-754. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-754. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall Rules contains all network firewall rules pertaining to IP (Internet Protocol).
Using the Configuration Menu Advanced > DMZ If you have a client PC that cannot run Internet applications properly from behind the DI-754, then you can set the client up to unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host.
Using the Configuration Menu Advanced > Performance > 802.11a Wireless PerformanceData Rate- select 802.11a or 802.11b+. Here, 802.11a has been chosen. This screen displays the wireless performance features of the Access Point portion of the DI-754. best is the default selection Transmit Power- full is the default selection. Beacon interval- beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended.
Using the Configuration Menu Advanced > Performance > 802.11b+ Wireless Performance- Select 802.11a or 802.11b+. 802.11b+ is selected here. Displayed in this window are the Wireless Performance features for the Access Point portion of the DI-754. Beacon Interval- 100 is the default setting RTS Threshold- 2432 is the default setting Fragmentation- 2346 is the default setting DTIM interval- 3 is the default setting Basic Rates- choose from1-2Mbps; 1,2,5.5,11 Mbps; or 1,2,5.
Using the Configuration Menu Tools> Admin User- admin is the User name Password- leave this field blank Remote Management: Select Enabled or Disabled Input the IP Address Input the Port number Apply- click Apply to save the changes 32
Using the Configuration Menu Tools > Time DI-754 Time settings- in this window you can choose the time zone; set the time; and enable or disable Daylight Savings Time. Default NTP Server- NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. This field is optional.
Using the Configuration Menu Tools > System System Settings Save Settings to Local Hard Drive- click Save to save the current settings to the local Hard Drive Load Settings from Local Hard Drive- click Browse to find the settings, then click Load Restore to Factory click Restore to restore the factory default settings Default Settings- 34
Using the Configuration Menu Tools > Firmware DI-754 Firmware Upgrade- click on the link in this screen to find out if there is an updated firmware; if so, download the new firmware to your hard drive. Browse- after you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. Click Apply to complete the firmware upgrade.
Using the Configuration Menu Tools > Misc Ping Test- the Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping Restart Device- click Reboot to restart the DI-754 Block WAN Ping- if you choose to block WAN Ping, the WAN IP Address of the DI-754 will not respond to pings. Blocking the Ping may provide some extra security from hackers.
Using the Configuration Menu Status > Device Info Device Information- This screen displays information about the DI-754 37
Using the Configuration Menu Status > Log DI-754 View Log- this screen displays the activity on the DI-754 Log Settings- for advanced features, click on Log Settings 38
Using the Configuration Menu Status > Stats DI-754 Traffic Statistics- displays the receive and transmit packets that are passing through the DI-754. Click on Refresh or Reset, for the most recent information. Status > Wireless Connected Wireless Client List- displays the wireless clients that are connected to the Access Point function of the DI-754.
Using the Configuration Menu Help Help- displays the complete Help menu. For help at anytime, click the Help tab in the Configuration menu.
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start>Control Panel>Network Connections Select Set up a home or small office network When this screen appears, Click Next.
Networking Basics Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown.
Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name.
Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Networking Basics Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
Networking Basics Naming your Computer To name your computer, please follow these directions:In Windows XP: Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this field is optional. To rename the computer and join a domain, Click Change.
Networking Basics Naming your Computer In this window, enter the Computer name Select Workgroup and enter the name of the Workgroup All computers on your network must have the same Workgroup name. Click OK Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.
Networking Basics Checking the IP Address in Windows XP This window will appear. Click the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 51
Networking Basics Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP) Click Properties Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) Input your DNS server addresses.
Networking Basics Assigning a Static IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences cClick on Network Select Built-in Ethernet in the Show pull-down menu Select Manually in the Configure pull-down menu Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields Click Apply Now 53
Networking Basics Selecting a Dynamic IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull-down menu Click Apply Now The IP Address, Subnet mask, and the Router’s IP Address will appear in a few seconds 54
Networking Basics Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Router or Acess Point, as shown. Checking the Wireless Connection by Pinging in Windows Me and 98 Go to Start > Run > type command. A window similar to this will appear. Type ping xxx.xxx.
Networking Basics Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning of Networking Basics,) you can use the Add Printer Wizard to add or share a printer on your network.
Networking Basics Adding a local printer (a printer connected directly to a computer) A printer that is not shared on the network and is connected directly to one computer is called a local printer. If you do not need to share your printer on a network, follow these directions to add the printer to one computer.
Networking Basics Adding a local printer Click Next Select Local printer attached to this computer (Deselect Automatically detect and install my Plug and Play printer if it has been selected.) Click Next Select Use the following port: From the pull-down menu select the correct port for your printer (Most computers use the LPT1: port, as shown in the illustration.
Networking Basics Adding a local printer Select and highlight the correct driver for your printer. Click Next (If the correct driver is not displayed, insert the CD or floppy disk that came with your printer and click Have Disk.) At this screen, you can change the name of the printer (optional.) Click Next Select Yes, to print a test page. A successful printing will confirm that you have chosen the correct driver.
Networking Basics Adding a local printer This screen gives you information about your printer.
Networking Basics Adding a local printer Go to Start> Printers and Faxes A successful installation will display the printer icon as shown at right. You have successfully added a local printer. Sharing a network printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network.
Networking Basics Sharing a network printer Click on Add a printer Click Next Select Network Printer Click Next 62
Networking Basics Sharing a network printer Select Browse for a printer Click Next Select the printer you would like to share Click Next Click Finish 63
Networking Basics Sharing a network printer To check for proper installation: Go to Start > Printers and Faxes The printer icon will appear at right, indicating proper installation. You have completed adding the printer.
Networking Basics Sharing an LPR printer To share an LPR printer (using a print server,) you will need a Print Server such as the DP-101P+. Please make sure that you have run the Network Setup Wizard on all the computers on your network. To share an LPR printer, please follow these directions: Go to Start > Printers and Faxes Click on Add a Printer The screen to the right will appear Click Next Select Local Printer...
Networking Basics Sharing an LPR printer Select Create a new port From the pull-down menu, select Standard TCP/IP Port, as shown. Click Next Please read the instructions on this screen Click Next Enter the Printer IP Address and the Port Name, as shown.
Networking Basics Sharing an LPR printer In this screen, select Custom Click Settings Enter the Port Name and the Printer Name or IP Address. Select LPR Enter a Queue Name (if your PrintServer/ Gateway has more than one port, you will need a Queue name.
Networking Basics Sharing an LPR printer This screen will show you information about your printer. Click Finish Select the printer you are adding from the list of Printers. Insert the printer driver disk that came with your printer.
Networking Basics Sharing an LPR printer You can rename your printer if you choose. It is optional. Please remember the name of your printer. You will need this information when you use the Add Printer Wizard on the other computers on your network. Click Next Select Yes, to print a test page. Click Next This screen will display information about your printer. Click Finish to complete the addition of the printer.
Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-754 Wireless Broadband Router. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. Note: It is recommended that you use an Ethernet connection to configure the DI-754 Wireless Broadband Router. 1.The computer used to configure the DI-754 cannot access the Configuration menu.
Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below.
Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.
Troubleshooting Double-click on Network Adapters Right-click on D-Link AirPro DWL-A650 Wireless Cardbus Adapter Select Properties to check that the drivers are installed properly Look under Device Status to check that the device is working properly Click OK 73
Troubleshooting 4. What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 5.
Troubleshooting 7. Resetting the DI-754 to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-754 to the factory default settings. Remember that D-Link AirPro products network together, out of the box, at the factory default settings.
Technical Specifications Standards IEEE 802.11b (optional with DWL-650+) IEEE 802.11a IEEE 802.3 and IEEE 802.3u IEEE 802.3x Ports (1) 10/100Base-T Ethernet, RJ-45 (UTP) (1) Power – 5V DC, 3.0A Network Management Web-Based Interface Network Architecture Supports Infrastructure Mode Diagnostic LED Power M1 M2 WAN 802.11a WLAN 802.
Technical Specifications Emissions: FCC part 15b UL1950-3 Physical Dimensions: L = 9.25 inches W = 6.25 inches H = 1.50 inches 802.11a Specifications Data Rates:* 6, 9, 12, 18, 24, 36, 48, 54, 72 Mbps (with auto-Fallback) Data Security: 64, 128, 152 bit with Dynamic Keying Access Control List Antenna Type: External 5dBi dipole antenna with diversity Available Channels: Eight non-overlapping channels for North America Frequency Range: 5.150 – 5.
802.11a Specifications (continued) Modulation Techniques: BPSK QPSK 16 QAM 64 QAM 802.11b Specifications with optional DWL-650+ Data Rates: 1, 2, 5.5, 11, 22 Mbps (with Automatic Fallback) Data Security: 64, 128, 256-bit WEP (Wired Equivalent Privacy) Encryption Available Channels: Eleven channels for North America. Three non-overlapping. Frequency Range: 2.4 – 2.4835 GHz Modulation Techniques: Barker (1Mbps/0db) Barker (2Mbps/0db) CCK (5.5Mbps/5.5db) PBCC (5.5Mbps/1.5db) CCK (11Mbps/8.5db) PBCC (11Mbps/4.
802.
Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH DLINK’S PRODUCT
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
