User`s manual

file that you want to upgrade. Use only files that have been downloaded

from the D-Link Support web site to ensure that your Broadband Router is

upgraded properly and to ensure proper operation. While upgrading the

firmware, DO NOT turn the power off. Turning the unit off while

upgrading could render the unit inoperable.

Setup

This section is crucial to enable your Broadband Router to work with

your ISP. The Setup screen will allow you to change the IP address of your

Broadband Router, change the WAN type, and allow you to modify the

settings that will ensure a proper connection to the Internet. Your ISP

should provide most of the settings found in the Setup screen to you. If you

followed the Quick Install Guide successfully, these settings should be set

and you should be able to access the Internet. If you are not sure which

settings should be used, please contact your ISP.

The LAN IP Address field is the IP address that your Broadband

Router is set to. In most circumstances the LAN IP Address can be left