User`s manual

AC adapter to this port to supply power.

Front Panel

The front panel provides LED’s for device status. Refer to the

following table for the meaning of each feature.

Power Power status of the DI-711. A steady LED indicates that the

power is on. No LED light indicates lack of power.

WLAN Wireless Connection status. The WLAN LED will be ON

indicating any wireless connection on the Local Network.

WAN Wide Area Network status. When connected to the Internet,

the WAN LED should be on.

LAN

Local Area Network status. A steady LED indicates a

connection to the wired local network. A flickering LED

indicates data transmission.

STAT System status indicator. A flickering light indicates proper

operation.

Rear Panel

The rear panel features a LAN port, WAN port, Serial port and

Factory Reset button. Refer to the following table for the meaning of each

feature.

Serial Port used to connect an external analog backup modem.

LAN The RJ-45 Ethernet port used to connect your hub/switch using

Ethernet cables to your DI-711.

WAN The RJ-45 Ethernet port labeled WAN is used to connect your

DI-711 to your DSL or Cable modem.

Reset Resets the configuration to default settings.