User`s manual

DI-624S User’s Manual

D-Link Systems, Inc.

Frequently Asked Questions

How do I conﬁgure my router to play Warcraft 3?

You must open ports on your router to allow incoming trafﬁc while hosting a game in Warcraft 3. To

play a game, you do not have to conﬁgure your router.

Warcraft 3 (Battlenet) uses port 6112.

For the DI-604, DI-614+. DI624,

DI-624S, DI-754, DI-764, or DI-774:

Step 1 Open your web browser and

enter the IP Address of your router

(192.168.0.1). Enter username

(admin) and your password (leave

blank).

Step 2 Click on Advanced and then

click Virtual Server.

Step 3 Create a new entry: Click

Enabled. Enter a name (warcraft3).

Private IP - Enter the IP Address of

the computer you want to host the

game. Select Both for Protocol Type

Enter 6112 for both Private Port and

Public Port Click Always or set a schedule.

Step 4 Click Apply and then Continue.

Note: If you want multiple computers from you LAN to play in the same game that you are hosting,

then repeat the steps above and enter the IP Addresses of the other computers. You will need to

change ports. Computer #2 can use port 6113, computer #3 can use 6114, and so on.

You will need to change the port information within the Warcraft 3 software for computers #2 and

up.

Conﬁgure the Game Port information on each computer:

Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you should see

Game Port. Enter the port number as you entered in the above steps.