User`s manual

82
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I setup my router to work with a Cable modem connection?
Dynamic Cable connection
(i.e. AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast)
Note: Please configure the router with the computer that was last connected directly to the cable
modem.
Step 1 Log into the web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password
is blank (nothing).
Step 2 Click the Home tab and click the WAN
button. Dynamic IP Address is the default
value, however, if Dynamic IP Address is not
selected as the WAN type, select Dynamic IP
Address by clicking on the radio button. Click
Clone Mac Address. Click on Apply and then
Continue to save the changes.