User`s manual

45
DI-624S User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Tools > Misc
Ping Test:
Restart
Device:
Block WAN
Ping:
Discard
Ping from
WAN side:
VPN Pass
Through:
The Ping Test is used
to send Ping packets to
test if a computer is on
the Internet . Enter the IP
Address that you wish to
Ping, and click Ping.
If you choose to block WAN
Ping, the WAN IP Address of
the DI-624S will not respond
to pings. Blocking the Ping
may provide some extra
security from hackers.
Click Reboot to restart the
DI-624S.
Click Enabled to block the
WAN ping.
UPNP:
To use the Universal Plug and Play feature click on Enabled. UPNP provides compatibility
with networking equipment, software and peripherals of the over 400 vendors that co-
operate in the Plug and Play forum.
Multicast
Streams:
The DI-624S supports VPN (Virtual Private Network) pass-through for both PPTP
(Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through
is enabled, there is no need to open up virtual services. Multiple VPN connections can
be made through the DI-624S. This is useful when you have many VPN clients on the
LAN network.
IPSec: select Enabled or Disabled.
PPTP: select Enabled or Disabled.
Enable this option to allow multicast traffic to pass through the router from the
Internet.