User`s manual

28
DI-624S User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their
MAC addresses from accessing the Network. You can either manually add a MAC address or select the
MAC address from the list of clients that are currently connected to the Broadband Router.
MAC Filters:
Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC
addresses listed below.
Filters:
Name:
Enter the name here.
MAC Address:
Enter the MAC Address.
DHCP Client:
Select a DHCP client from the pull-down list; click Clone to copy that MAC
Address.
Select the filter you wish to use; in this case, MAC filters was chosen.