Specifications

15
WEP - For a level of security, select Enable Encryption to use WEP (Wired Equivalent
Privacy) on the network. All devices on the network, and the access point, must share
the same WEP selection - either Enable or Disable.
Site Survey - Click Site
Survey to receive a list of
networks that are available
for connection. Please see
the screen on the following page for more information on this feature.
SSID (Service Set
Identifier) -
Using the Configuration Menu (continued)
Wireless
AP Name -
You may choose to rename
your DWL-G710, especially if
you have more than one
DWL-G710 on your network.
WEP Encryption - Select either 64- or 128-bit length.
WEP Mode - Select ASCII or Hexadecimal mode and then input the appropriate
digits or letters into each Key field. You can create up to 4 keys. Select the key you
wish to use.
Enter the SSID of the network
you wish to repeat.
TX Rates -
Select the transmission rate for the network.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Apply - Click Apply to save the changes.
Channel - Select the channel from the pulldown menu.
All devices on the network must share the same channel in order to communicate.
WPA-PSK/WPA2-PSK - Select either WPA-PSK or WPA2-PSK. Select this to
secure your network using a passphrase and dynamic key changes. The passphrase
must be between 8 - 63 characters.