User Guide

DI
-
3660 Router
__________________________________________________________________________________________________________________
12
Description of the Components on the Rear Panel of the Router:
The following table describes the components on the Router’s panel:
No Name Description
1 Power The device is powered ON
2 Console Connected to the monitored terminal through this port to monitor and configure
3 AUX
Connected to asynchronous Modem through this port; and the port uses the
specified communication cable.
4 Ready1 LED ON when system has self-checked successfully.
5 Active1 LED ON when interface card and module is inserted in the slot.
6 Ready2 LED ON system has self-checked successfully.
7 Active2 LED ON interface card and module is inserted in the slot.
8 Ready3 LED ON when system has self-checked successfully.
9 Active3 LED ON when interface card and module is inserted in the slot.
10 Ready4 LED ON when system has self-checked successfully.
11 Active4 LED ON when interface card and module is inserted in the slot.
12 Ready5 LED ON when system has self-checked successfully.
13 Active5 LED ON when interface card and module is inserted in the slot.
14 Ready6 LED ON when system has self-checked successfully.
15 Active6 LED ON when interface card and module is inserted in the slot.
16 SLOT1 Network interface modules slot.
17 SLOT2 Network interface modules slot.
18 SLOT3 Network interface modules slot.
19 SLOT4 Network interface modules slot.
20 SLOT5 Network interface modules slot.
21 SLOT6 Network interface modules slot.
22 Power Switch Press upwards to turn the Router ON, press downwards to turn it OFF
23 Power Input
AC110～ 220V