Remote Access Router User's Guide

DI-1162 Remote Access Router

86 Configuration and Management

Static NAT

This screen (below) is how the

NAT IP Pool

appears, if

Static NAT

was chosen for the

Translation Mode

parameter. Each entry in this

configuration is used to map a single global IP address a single local IP

address.

The parameters are described as follows:

•

Global IP – this is a single, global IP Address that is valid on the

Internet, or on the same subnet of the global interface.

•

Local IP – this is a single, local IP Address that is not valid on the

Internet.

Static NAPT