Remote Access Router User's Guide

DI-1162 Remote Access Router
84 Configuration and Management
Dynamic NAT
This screen (below) is how the
NAT IP Pool
appears, if
Dynamic
NAT
was chosen for the
Translation Mode
parameter. Each entry, in
this configuration, can be used to map multiple, contiguous global
addresses and local addresses to each other.
The parameters are described below:
• Global IP – an IP Address that is globally unique and valid on the
Internet. It is the base, global address for the global addresses that
will be recognized by the interface in the
Global Interface
parameter.
• Range – this is the range of contiguous, global addresses above
(and including) the base
Global IP
.
• Local IP – an IP Address that is only used in the stub domain
since it is not unique. It is the base, local address for the local
addresses that will be recognized by the interface in the
Local
Interface
parameter.