Remote Access Router User's Guide

DI-1162 Remote Access Router
44 Configuration and Management
The parameters are described below:
• SNMP Community String – this community string is a user-
defined identifying name used to group together some arbitrary set
of SNMP application entities managed by the network manager.
• Access Right – this element of the set { READ ONLY,
READ/WRITE } is called the SNMP access mode. If the SNMP
Community String has an Access Right of READ/WRITE, then
that Community String is available as an operand for the
get
,
set
,
and
trap
operations. Otherwise, if the Community String’s
corresponding Access Right is READ ONLY, then it is available
as an operand for the
get
and
trap
operations only.
• State – this validates or invalidates the use SNMP Community
String, by setting the string to ‘Valid’ or ‘Invalid’. Note that
setting the use of the string to ‘Invalid’ is the same as removing the
string, however, the string remains so as to be validated at an
appropriate time.
SNMP Trap Manager
From the
SNMP Agent Configuration
menu, select and enter the
SNMP
Trap Manager
sub-menu. You will see the following configuration
screen: