Remote Access Router User's Guide

DI-1162 Remote Access Router
Configuration and Management 113
♦ Interface – The WAN interface to be tested.
♦ Phone Number – The phone number that will be dialed by the
WAN Interface. Please ensure that a modem answers the phone on
the other end.
♦ Baud Rate – The rate of data transmission. The answering modem
must be capable of operating at the baud rate defined here.
♦ Connection Test – Press <Enter> to begin the test. The router will
dial the phone number defined above, try to establish a valid link
with the answering WAN device and hang up.
♦ Dial Out – Press <Enter> to begin the test. The router will dial the
phone number above and negotiate a connection with the
answering device.
♦
Hang up – Press <Enter> to hang up after Dialing Out.