User Manual

12DHP-P701AV User Manual
Section 2 - Hardware Installation
5. Adding More Adapters (Optional)
If you would like to add more than two adapters, press the Simple Connect button of the additional adapter for 1 second. The Power LED will start
blinking after you release the button. Then press the Simple Connect button of any adapter in your existing PowerLine network for 1 second. The
Power LED will start blinking after you release the button.
Note: Both Simple Connect buttons must be pressed within two minutes.
After performing the above Push Button Security Setup steps, your PowerLine network will be securely congured using the same network encryption
key for all PowerLine adapters.