User manual

11D-Link DHP-P500AV/DHP-P501AV User Manual
Section 2 - Installation
Hardware Installation
Power
Plug in the DHP-P500AV into an AC wall outlet or power strip.
Note:PowersourceisconrmedwhenthePowerLEDontheDHP-P500AVisilluminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable
connector located on the DHP-P500AV and attach the other
end of the Ethernet cable to the network or PC. Network
ConnectivityisconrmedwhentheEthernetLEDonthe
DHP-P500AV are illuminated.
WARNING! Only power cords are allowed to be inserted into the
EUT socket-outlet, no other direct plug-in equipment.