Version 2.
Preface D-Link reserves the right to revise this publication and to make changes to the content herein without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date May 27, 2013 2.0 November 25, 2014 Description • Initial release for hardware revision A1 • Hardware revision B1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Product Overview............................................................... 4 Package Contents................................................................4 System Requirements.........................................................4 Introduction..........................................................................5 Features.................................................................................5 Hardware Overview.....................................
Section 1 - Product Overview Product Overview Package Contents DHP-600AV • D-Link DHP-600AV PowerLine AV2 1000 Gigabit Adapter • Ethernet Cable • Quick Install Guide DHP-601AV • Two D-Link DHP-600AV PowerLine AV2 1000 Gigabit Adapters • Two Ethernet Cables • Quick Install Guide System Requirements • • • • Windows® 7, Vista®, or XP® (with Service Pack 3) Ethernet network interface (10/100/1000 Mbps) PC with 1.
Section 1 - Product Overview Introduction The DHP-600AV is a fast, 1000 Mbps1 PowerLine AV2 1000 Gigabit Adapter which allows you to connect your home computers, networking devices, and gaming devices through the most pervasive medium in your house - the electric powerlines - and share Internet connections and printers, transfer files, play games, and more.
Section 1 - Product Overview Hardware Overview LEDs Power LED • Solid. The device is receiving electrical power. • Blinking. The device is setting itself up after reset or simple connect button was pressed. • Off. The device is not receiving electrical power. Powerline LED • Solid. The device is connected to a PowerLine network. • Off. The device has not found any other compatible PowerLine devices using the same encryption key. The color indicates the PowerLine link rate: • Green.
Section 1 - Product Overview Hardware Overview Connection Gigabit Ethernet Port Connect a CAT5 Ethernet cable to your PC or Ethernet device. Simple Connect Button Press to secure your network or reset your device back to the factory default settings. Refer to “Push Button Security” on page 9 for more information. Reset Button Press and hold the button for 10 seconds to reset to the factory default settings.
Section 2 - Installation Hardware Installation Power Plug the DHP-600AV into an AC wall outlet or power strip. Note: Power supply is confirmed when the Power LED on the DHP-600AV is illuminated. Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the DHP-600AV and attach the other end of the Ethernet cable to the network or PC. Network connectivity is confirmed when the Ethernet LED on the DHP-600AV is illuminated.
Section 2 - Installation Push Button Security Understanding PowerLine AV2 1000 Gigabit Adapter Security The PowerLine AV2 1000 Gigabit Adapters on the same network must use an identical encryption key. The default encryption key of each PowerLine AV2 1000 Gigabit Adapter is HomePlugAV. All PowerLine AV2 1000 Gigabit Adapters with the default encryption key can communicate with each other. It’s recommended to create a private encryption key for network security purpose.
Section 2 - Installation 3. Second Adapter Within two minutes of pushing the Simple Connect Button on the first adapter, press the Simple Connect Button on second adapter in your PowerLine network for no more than three seconds. The Power LED will start blinking after you release the button. Note: Both Simple Connect Buttons must be pressed within two minutes. After the above network security setup steps, your PowerLine network will be securely configured with the same network encryption key.
Section 2 - Installation 1 ROOM C DHP-600AV PC 2 ROOM A ROOM B DHP-600AV Internet ROOM C DHP-600AV DHP-600AV PC Router PC EXISTING PLC NETWORK D-Link DHP-600AV/DHP-601AV User Manual 11
Section 2 - Installation PowerLine Installation Considerations Plan the location of your PowerLine devices: 1. Connect PowerLine devices to electrical outlets that are not controlled by a wall switch to avoid accidentally turning off power to the device. 2. Do not connect the PowerLine devices to an extension cord, surge protector, or power strip as this might prevent it from working correctly, or reduce the network performance. 3.
Section 3 - Installation Considerations Important Safety Instructions Please read all of the safety and operating instructions before using your device: 1. Do not open the device or attempt to repair or service the device. 2. Only use the included power adapter to power your device. 3. Ensure that the device is plugged into the wall in a vertical position, with the ports facing down. 4. Use the device in a dry location, and avoid placing it in humid environments. 5.
Section 4 - Troubleshooting Troubleshooting • I can’t configure any parameters of the PowerLine AV2 1000 Gigabit Adapter, an error is shown when I try to configure it: Please make sure you have not unplugged the PowerLine AV2 1000 Gigabit Adapter while configuring it. • I changed the connection cable to another network adapter and now the setup utility does not work correctly: Please restart the utility each time you disconnect the connection cable.
Appendix A - Technical Specifications Technical Specifications General Functionality Physical PowerLine Interface • Power plug (country-dependent) Ethernet Interface • Gigabit Ethernet LAN port • RJ-45 connector Standards • IEEE 802.3 • IEEE 802.
