User manual

11D-Link DHP-311AV User Manual
Section 2 - Installation
5. Adding More Adapters
If you would like to add more than 2 adapters, press the button of the additional adapter for no more than 2 seconds. The Power LED will start
blinking after you release the button. Then press the button of any adapter in your existing PowerLine network for no more than 2 seconds. The
Power LED will start blinking after you release the button.
Note: Both Simple Connect Buttons must be pressed within 2 minutes. After above network security setup steps, your PowerLine network will be
securely conî‚”gured with the same network encryption key.