Datasheet
7D-Link DHP-306AV User Manual
Section 2 - Installation
Hardware Installation
Power
Plug in the DHP-306AV into an AC wall outlet or power strip.
Note: Power source is conrmed when the Power LED on the DHP-306AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable
connector located on the DHP-306AV and attach the other
end of the Ethernet cable to the network or PC. Network
Connectivity is conrmed when the Ethernet LED on the
DHP-306AV are illuminated.
Power Saving Mode Enabled
When the Ethernet link activity being down for 5 minutes, the
DHP-306AV will automatically go into power saving mode.
The Power LED will blink intermittently.