User manual

8D-Link DHP-307AV User Manual
Section 2 - Installation
Hardware Installation
Power
Plug in the DHP-306AV into an AC wall outlet.
Note: Power source is conrmed when the Power LED on the DHP-306AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector located on the DHP-306AV and attach the other end of the Ethernet cable to
the network or PC. Network connectivity is conrmed when the PowerLine and Ethernet LEDs on the DHP-306AV are illuminated.
Recommendations
• For best results, use in a regular wall outlet without any other product plugged into the same outlet. Connecting this product to a power strip or
a surge protector may adversely aect the performance of this product.
• Avoid using the PowerLine AV Network in an electrical outlet that is located near an appliance that uses a lot of power such as a washer, dryer,
refrigerator, microwave, hair dryer, or air conditioning system.
• To verify connectivity or if you are having connection problems, plug the adapters in the same room to verify whether your home’s electrical
wiring is contributing to the issue. The adapters’ PowerLine LED indicators will illuminate if the connection is established.
5V
-- -
3A
1 2 LAN 3 4 INTERNET USB
RESET
INTERNET
Wireless Router
Cable/DSL Modem
DHP-306AV (Included) DHP-306AV (Included)