User manual

42D-Link DHP-W307AV User Manual
Section 3 - Configuration
Firmware
You can upgrade the rmware of the access point from this page. Make sure the rmware you would like to use is
on the local hard drive of your computer. Click Browse... to locate the rmware le to be used for the update. Please
check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades
to your hard drive from the D-Link support site.
Firmware
Information:
Firmware
Upgrade:
Language Pack
Upgrade:
Click on the Check Now button to nd out if there
is an updated rmware or language pack version.
If a new version exists, download the new rmware
to your hard drive.
After you have downloaded the new rmware, click
Browse to locate the rmware update on your
hard drive. Click Upload to complete the rmware
upgrade.
To upgrade the language pack, follow these steps:
1. Click the Browse button to locate the D-Link
language pack upgrade le on your computer.
Note: Language pack le extension will be *.lng
2. Once you have found the le, click the Upload
button to begin the language pack upgrade
process. This can take a minute or more.
3. Wait for the device to reboot. This process can
take about 75 seconds.