User manual

13D-Link DHP-W307AV User Manual
Section 2 - Installation
Powerline Network - Quick Setup
Simple Connection Button Usage
The Simple Connection Button is used to add a Powerline AV device to a Powerline network. You can allow a Powerline
AV device to join a network by pressing the Simple Connection Button to toggle it to the Broadcast state or Join state.
The Simple Connection Button has 3 different trigger states:
Broadcast state - Enables a Powerline AV device to provide information for another Powerline AV device
to join its Powerline network (works even if it is the only device existing within the network group). The
rst Powerline device will use this state when the Simple Connection Button is pressed.
Join state - This allows an ungrouped Powerline AV device to join an existing Powerline network.
Powerline devices added after the rst device will be in the Join State when the Simple Connection Button
is pressed.
Ungroup state - Hold down the Simple Connection Button for more than 10 seconds to detach the device
from its network group.