User manual

15D-Link DHP-209AV User Manual
Section 3 - Troubleshooting
Troubleshooting
If I do not see LEDs light up?
If the Power LED is o, make sure the PowerLine devices are plugged into outlets with power. Also make sure the PowerLine devices are not
plugged into an extension cord, power strip, or surge protector.
If the PowerLine LED is o, the devices are unable to nd each other. You can plug in all the PowerLine adapters within the same room in order
to determine whether your home’s electrical outlets are suitable. The adapters’ PowerLine LED will light up when a connection is established.
If I do not see a blinking light from the Ethernet LED?
If this light is not blinking, this indicates there is no data trac. Make sure the router or the Ethernet-enabled device is turned on and connected
properly.
If I’m having problems with conguration?
If you are having problems conguring the network with two or more PowerLine adapters, make sure you reset all the devices and start the
conguration process again.
If you get an error message during conguration, make sure you have not inadvertently unplugged the PowerLine adapter.
If I plugged the connection cable into another network adapter and now the utility does not work correctly?
Make sure you restart the utility each time you disconnect the cable.