User manual
83D-Link DHP-1320 User Manual
Section 3 - Conguration
PPPoE
The DHP-1320’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device. The DHP-1320’s IPv6
Firewall functions in a similar way to the IP Filters feature.
Select PPPoE from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in
the next box.
Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specic ISP. 1500 is
the default MTU.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
My IPv6
Connection:
PPPoE:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection
Mode:
MTU:
Maximum Idle
Time:
IPv6