User manual

38D-Link DHP-1320 User Manual
Section 3 - Conguration
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.
Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down
menu. Click New Schedule to create a new schedule.
The Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Select one of the following:
802.11g Only - Select if all of your wireless clients are
802.11g.
802.11n Only - Select only if all of your wireless clients are
802.11n.
802.11b Only - Select if all of your wireless clients are
802.11b.
Mixed 802.11n and 802.11g - Select if you are using a mix
of 802.11n and 802.11g wireless clients.
Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 802.11b wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select 802.11n, 802.11g and 802.11b
The Auto Channel Selection setting can be selected to allow the DHP-1320 to choose the channel with the least amount of
interference.
Indicates the channel setting for the DHP-1320. By default the channel is set to 1. The Channel can be changed to t the channel
setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option
will be greyed out.
Enable Wireless:
Schedule:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Selection:
Wireless Channel:
Manual Wireless Settings
802.11n/b/g (2.4GHz)