User manual
16D-Link DHP-1320 User Manual
Section 1 - Product Overview
PowerLine Security
It is strongly recommended to encrypt your PowerLine network. By encrypting the data that is sent via your PowerLine adapters, you will prevent
nearby hackers with a Powerline adapter to connect to your network and steal your information.
To encrypt your PowerLine network, follow the steps below:
PowerLine Network-Quick Setup
The ENY Button is used to add a PowerLine AV device to a PowerLine network. You can allow the DHP-1320 to join a network by pressing the ENY
Button to toggle it to the Broadcast state or Join state.
The ENY Button has 3 dierent trigger states:
Broadcast state- Enables the DHP-1320 to provide information for another PowerLine AV device to join its PowerLine network (works
even if it is the only device existing within the network group). The rst PowerLine device will use this state when the ENY Button is
pressed.
Join State - This allows an ungrouped PowerLine AV device to join an existing PowerLine network. PowerLine devices added after
the rst device will be in the Join State when the ENY Button is pressed.
Ungroup State - Hold down the ENY Button for more than 10 seconds to detach the device from its network group.
Encryption Button Usage