User manual
14D-Link DHP-1320 User Manual
Section 2 - Installation
Hardware Installation - For Access Point Mode
5V
-- -
3A
1 2 LAN 3 4 INTERNET USB
RESET
INTERNET
1 2 3
INTERNETLAN
AR RT
USB
RESET ON/OFF AC IN
1 2 3
INTERNETLAN
AR RT
USB
RESET ON/OFF AC IN
INTERNET
DHP-306AV
Wireless Router
Modem
Wireless N
PowerLine Router
(AP Mode)
DHP-306AV
Step 2
Turn on the DHP-1320 by pushing the power button located on the back of this unit. Connect one end of the included Ethernet cable to the
Ethernet port on the DHP-1320 and attach the other end of the Ethernet cable to the PC as illustrated in Room 3.
Note: Connection to an Ethernet-enabled device is conrmed when the green LED Ethernet indicator on the PowerLine device is illuminated.
Step 3
Open a web browser, enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password
box blank. Click Log In to continue the setup. Please refer to the user to page 108 for more detailed installation information and advanced features.
Step 1
Move the switch on the back of the DHP-1320 to “AP”. Connect the supplied power cord into the power receptor located on the back of the DHP-
1320 and plug into a power outlet as illustrated in Room 3.
Note: To secure the PowerLine Network from unauthorize users, please refer to the PowerLine Network Security section.
Note: Power source is conrmed when the green LED Power Indicator on the PowerLine devices is illuminated.
Room 2
Room 1
Room3