User manual
126D-Link DHP-1320 User Manual
Section 3 - Conguration
Time
This page will allow you to change the Administrator password. The administrator password has read/write access.
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and an
end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
Enter the NTP server or select one from the drop
down menu.
To manually input the time, enter the values in
these elds for the Year, Month, Day, Hour, Minute,
and Second and then click Set Time. You can also
click Copy Your Computer’s Time Settings.
Time Zone:
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Manual: