User manual

117D-Link DHP-1320 User Manual
Section 3 - Conguration
Network
Name:
Public
Network
Name:
Private
Network
Name:
Scan:
Add Memeber:
Device Name:
Password:
Member List:
Link Rate:
You can set the name of your network and to make it
either public or private. Make sure the Network Name
of all of the devices within your PowerLine network is
the same.
Select this option if you would like to make your
powerline network public with the default Network
Name of “HomePlugAV”. Since this is a commonly used
Network Name, it is less secure than a private Network
Name.
Select this option if you wish to make your powerline
network more secure by using a private Network Name.
Type the name of your private PowerLine network in
the eld.
Scan for new PowerLine devices.
This section lets you add new PowerLine AV devices to
your PowerLine network. To add a new device, give it
a Device Name and enter its Password, then click Add.
When you add a device it is given the current Network
Name.
Type a name you wish to use to identify a specic PowerLine AV device. For example, “Jack’s room”.
The Password is used to verify that you are authorized to perform changes on a device. You can
nd the Password printed on the back of your device.
This section provides information on the PowerLine AV devices in your PowerLine network, or any devices that were previously
connected but it are currently disconnected.
Displays the device’s current data rate in Mbps.