User manual

D-Link Corporation confidential
15
 Setup
Setup allows you to configure parameters for Internet connection, wire networking and wireless networking by
Setup Wizard or manually configuration.
 Advanced (Advanced Function Configuration)
Advanced Function Configuration allows you to configure advanced features such as MAC Address Filter,
Advanced Wireless and User Limit.
 Tools
Tools provides administrators to manage the router.
 Status
Status allows you to display the router information and status.
 Support
To provide an online user manual that facilitates the setup.
2.3.2 Setup
Feature
Detailed Description
2.3.2.1
Setup Wizard
 The Setup Wizard section is used to configure the wireless settings for the
device via easy wizard.
2.2.2.2
Network Settings

Use this section to configure the internal network settings of your AP.
Device Name(NetBIOS Name) allows you to configure this device more
easily when your network using TCP/IP protocol. You can enter the
device name of the AP into your web browser to access the instead of IP
address for configuration. Recommend to change the device name if
there're more than one D-Link devices within the subnet.
2.3.2.3
Wireless Settings
 The wireless section is used to configure the wireless settings for the
router.
 Wireless Network Settings
This sections allows admins to setup the wireless network settings such as
SSID, Wireless Channel, 802.11 Mode, Transmission Rate, Channel
Width, and Visibility Status.
 Wireless Security Mode
To protect your privacy you can configure wireless security features. This
device supports three wireless security modes, including WEP, WPA-
Personal, and WPA-Enterprise. WEP is the original wireless encryption
standard. WPA provides a higher level of security. WPA-Personal does
not require an authentication server. The WPA-Enterprise option requires
an external RADIUS server.
2.3.2.4
PLC Settings

To configure the PLC settings of the device and also to configure the Qos
on your HomePlug network.
 Network Name
The Network Name allows the HomePlug devices that have the same
network name in the HomePlug network to communicate with each other.
 Add Member
Use this section to configure the HomePlug device on your network
easily.
 Manual Add Member
This section allows users to configure the HomePlug device manually.
 Member List
HomePlug device connected to the unit will have their information
displayed in the table. The table will show the Name, MAC Address,
speed and Status for each device.