x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch i
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch _____________________________________________ Information in this document is subject to change without notice. © 2012 D-Link Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents Intended Readers ........................................................................................................................................................................... vi Typographical Conventions .......................................................................................................................................................... vi Notes, Notices, and Cautions .........................................................................................
Traps ........................................................................................................................................................................................ 26 MIBs ........................................................................................................................................................................................ 26 IP Address Assignment .......................................................................................................
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Intended Readers The xStack® DGS-3600 Series Hardware Installation Guide contains information for setup and management of the Switch. This manual is intended for network managers familiar with network management concepts and terminology. Typographical Conventions Convention Description [] In a command line, square brackets indicate an optional entry.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( followed.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch • Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip. • To help protect the system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch NOTE: A qualified electrician must perform all connections to DC power and to safety grounds. All electrical wiring must comply with applicable local or national codes and practices. CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if uncertain that suitable grounding is available.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Section 1 Introduction Front Panel Components LED Indicators Rear Panel Side Panel The DGS-3600 Gigabit Ethernet switches are members of the D-Link xStack® family.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Features The list of features and protocols below highlights the significant features supported by the xStack® DGS-3600 Series. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Physical Stacking—up to 12 devices, with a bandwidth up to 40G Virtual Stacking IEEE 802.3ad Link Aggregation Control Protocol IEEE 802.1X Port-based and MAC-based Access Control IEEE 802.1Q VLAN IEEE 802.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Port Mirroring, including multiple session support and ability for link aggregation to be set as target port Network Load Balancing (NLB), a MAC forwarding control for supporting the Microsoft server load balancing application where multiple servers can share the same IP address and MAC address Per port queue egress bandwidth control Cable diagn
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch • • • • • • • • • • • • • • • • • • • • • • Routing table size--total 12K routing entries, all IPv4/IPv6 static and dynamic routes share these entries: maximum 256 entries for IPv4 static routes, maximum 128 entries for IPv6 static routes, maximum 12K entries for IPv4 dynamic routes, maximum 6K entries for IPv6 dyanmic routes L3 Forwarding table size—total 8K L3 hardware forwarding entries, both IPv4 and IPv6 forardingt share these entri
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Ports The following table lists the relative ports that are present within each switch: DGS-3612 DGS-3612G DGS-3627 DGS-3627G DGS-3650 Twelve 10/100/1000BASE-T Ports Twelve 100/1000Mbps SFP Ports Twenty-four 10/100/1000BASE-T Twenty-four 1000Mbps SFP Ports Forty-eight 10/100/1000BASET Four SFP Combo Ports Four 1000BASE-T Combo Ports Four 1000BASET Combo Ports Four SFP Combo Ports One female DCE RS-232 DB-9 console port One f
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Front Panel Components DGS-3612 • Twelve 10/100/1000BASE-T ports • Four Combo SFP ports located to the right • One female DCE RS -232 DB-9 console port • LEDs for Power, Console, RPS, and Link/Act/Speed for each port Figure 1- 1.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch DGS-3650 • Forty-eight 10/100/1000BASE-T ports • Four Combo SFP ports located to the right • One female DCE RS -232 DB-9 console port • LEDs for Power, Console, RPS, Link/Act/Speed and 10GE for each port • Stacking Module Numbered LED Figure 1- 5.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Figure 1- 6. DGS-3612G LEDs Figure 1- 7. DGS-3627 LEDs Figure 1- 8. DGS-3627G LEDs Figure 1- 9. DGS-3650 LEDs Figure 1- 10.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Rear Panel The rear panels of the DGS-3612, DGS-3612G, DGS-3627, DGS-3627G and the DGS-3650 are described below. DGS-3612 and DGS-3612G The rear panel of the DGS-3612 and the DGS-3612G contains an AC power connector, and an outlet for an optional external RPS. Figure 1- 11. Rear panel view of the DGS-3612 Figure 1- 12.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Side Panel The right-hand side panel of the Switch contains a system fan and ventilation along the entire right side. The left hand panel includes a system fan and a heat vent. The system fans are used to dissipate heat. Do not block these openings on either side of the Switch. Leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Section 2 Installation Package Contents Installation Guidelines Installing the Switch without the Rack Installing the Switch in a Rack Mounting the Switch in a Standard 19" Rack Power On Power Failure Installing the SFP Ports Optional 10GE Uplink Module External Redundant Power System Package Contents Open the shipping carton of the Switch and carefully unpack its contents.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Installing the Switch without the Rack When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the Switch and any other objects in the vicinity. Figure 2 - 1.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Mounting the Switch in a Standard 19" Rack CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizers before installing components in the rack. After installing components in a rack, do not pull more than one component out of the rack on its slide assemblies at one time.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Installing the SFP Ports The xStack® DGS-3600 Series switches are equipped with SFP (Small Form Factor Portable) ports, which are to be used with fiber-optical transceiver cabling in order to uplink various other networking devices for a gigabit link that may span great distances.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Optional Module Slots Figure 2 - 5. Optional Module slots at the rear of the DGS-3627 (or DGS-3627G) Optional Module Slots Figure 2 - 6. Optional Module slots at the rear of the DGS-3650 After removing the faceplate, remove the DEM-410X or DEM-410CX optional module from its box. The front panel should resemble the drawings represented here. Figure 2 - 7.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch External Redundant Power System The xStack® DGS-3600 Series switches are equipped with a redundant power supply feature. Follow the instructions below to connect a RPS power supply (DPS-500) to the DGS-3627/DGS-3627G/DGS-3612G/DGS-3650. The DPS-500 is a redundant power-supply unit designed to conform to the voltage requirements of the switches being supported. DPS-500 can be installed into the DPS-900, or DPS-800.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Connect to RPS The DPS-500 is connected to the Master Switch using a 14-pin DC power cable. A standard, three-pronged AC power cable connects the redundant power supply to the main power source. Figure 2 - 11. The DGS-3627 with the DPS-500 chassis RPS 1. Insert one end of the 14-pin DC power cable into the receptacle on the switch and the other end into the redundant power supply. 2.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch DPS-200 The xStack® DGS-3612 switch can connect an RPS power supply to the Switch (DPS-200) redundant power-supply unit designed to conform to the voltage requirements of the switches being supported. The DPS-200 is a redundant power-supply unit designed to conform to the voltage requirements of the switches being supported. DPS-200 can be installed into DPS-900, or DPS-800.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch DPS-800 The DPS-800 is a standard-size rack mount (1 standard unit in height) designed to hold up to two DPS-200 redundant power supplies. Figure 2 - 14. Install DPS-200 in DPS-800 The RPS can be mounted in a standard 19" rack. Use the following diagram to guide you. Figure 2 - 15.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Section 3 Connecting the Switch Switch to End Node Switch to Hub or Switch Connecting to Network Backbone or Server NOTE: All 10/100/1000Mbps NWay Ethernet ports can support both MDI-II and MDI-X connections. Switch to End Node End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ 45 Ethernet/Fast Ethernet Network Interface Card (NIC) and most routers.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Switch to Hub or Switch These connections can be accomplished in a number of ways using a normal cable. A 10BASE-T hub or switch can be connected to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP cable. A 100BASE-TX hub or switch can be connected to the Switch via a twisted-pair Category 5 UTP/STP cable. A 1000BASE-T switch can be connected to the Switch via a twisted pair Category 5e UTP/STP cable.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Section 4 Introduction to Switch Management Management Options Connecting the Console Port (RS-232 DCE) Managing the Switch for the First Time Password Protection SNMP Settings IP Address Assignment Management Options This system may be managed out-of-band through the console port on the front panel or in-band using Telnet. The user may also choose the web-based management, accessible through a web browser.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch 7. Under Properties, select VT100 for Emulation mode. 8. Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that you select Terminal keys (not Windows keys). NOTE: When you use HyperTerminal with the Microsoft® Windows® 2000 operating system, ensure that you have Windows 2000 Service Pack 2 or later installed. Windows 2000 Service Pack 2 allows you to use arrow keys in HyperTerminal's VT100 emulation. See www.microsoft.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Managing the Switch for the First Time The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or changing its settings. This section tells how to log onto the Switch. NOTE: The passwords used to access the Switch are case-sensitive; therefore, "S" is not the same as "s." When you first connect to the Switch, you will be presented with the first login screen.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Password Protection The Switch does not have a default user name and password. One of the first tasks when settings up the Switch is to create user accounts. Once logged in using a predefined administrator-level user name, users will have privileged access to the Switch's management software.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch SNMP Settings Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed specifically for managing and monitoring network devices. SNMP enables network management stations to read and modify the settings of gateways, routers, switches, and other network devices. Use SNMP to configure system features for proper operation, monitor performance and detect potential problems in the Switch, switch group or network.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch DGS-3627:admin#show switch Command: show switch Device Type Unit ID MAC Address IP Address VLAN Name Subnet Mask Default Gateway Boot PROM Version Firmware Version Hardware Version System Name System Location System Uptime System Contact Spanning Tree GVRP IGMP Snooping MLD Snooping RIP DVMRP PIM PIM6 CTRL+C ESC q Quit : DGS-3627 Gigabit Ethernet Switch : 1 : 00-19-5B-16-60-80 : 192.168.69.123 (Manual) : default : 255.255.255.0 : 0.0.0.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Section 5 Web-based Switch Configuration Introduction Logging in to the Web Manager Web-based User Interface Web Pages Introduction All software functions of the xStack® DGS-3600 Series switches can be managed, configured and monitored via the embedded Web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through a standard browser.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Web-based User Interface The user interface provides access to various Switch configuration and management screens, allows the user to view performance statistics, and permits graphical monitoring of the system status. Areas of the User Interface The figure below shows the user interface. Three distinct areas divide the user interface, as described in the table.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch FDB Settings.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Appendix A - Technical Specifications Specifications listed here apply to all Switches in the DGS-3600 Series except where otherwise noted. General Protocols IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000BASE-T (SFP “Mini GBIC”) IEEE 802.3ae (10G Optional Modules) IEEE 802.1D/w/s Spanning Tree (Rapid, Multiple) IEEE 802.1P/Q VLAN IEEE 802.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Network Cables Cat.5 Enhanced for 1000BASE-T UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX UTP Cat.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Physical and Environmental Safety CB Report, CUL Performance Transmission Method Store-and-forward Packet Buffer 2 MB per device Packet Filtering / 14,881 pps (10M port) Forwarding Rate 148.810 pps (100M port) 1,488,100 pps (1Gbps port) MAC Address Learning Automatic update. Supports 16K MAC address. Priority Queues 8 Priority Queues per port. Forwarding Table Age Time Max age: 10-1000000 seconds. Default = 300.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Appendix B - Cables and Connectors When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments. Figure B- 1.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Appendix C - Cable Lengths Use the following table to as a guide for the maximum cable lengths.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch Glossary 1000BASE-SX: A short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters 1000BASE-LX: A long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 100BASE-FX: 100Mbps Ethernet implementation over fiber. 100BASE-TX: 100Mbps Ethernet implementation over Category 5 and Type 1 Twisted Pair cabling. 10BASE-T: The IEEE 802.
x Stack ® DGS-3600 Series Layer 3 M anaged Gigabit Ethernet Sw itch LAN - Local Area Network: A network of connected computing resources (such as PCs, printers, servers) covering a relatively small geographic area (usually not larger than a floor or building). Characterized by high data rates and low error rates. latency: The delay between the time a device receives a packet and the time the packet is forwarded out of the destination port. line speed: See baud rate.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Tech Support Technical Support You can find software updates and user documentation on the DLink website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://dlink.com Technische Unterstützung Deutschland: Österreich: Schweiz: Web: http://dlink.
Assistance technique Assistance technique D-Link sur internet : http://dlink.com Assistance technique D-Link par téléphone : 01 76 54 84 17 Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://dlink.com Supporto tecnico Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato Telefono: 02 87366396 http://dlink.
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://dlink.com Technická podpora Web: http://dlink.com E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání je zpoplatněno dle příslušných tarifů Vašeho operátora. Technikai Támogatás Tel. : 06 1 461-3001 Fax : 06 1 461-3004 Land Line 14,99 HUG/min - Mobile 49.
Teknistä tukea asiakkaille Suomessa: Internetin kautta : http://dlink.com Arkisin klo. 09:00 - 18: 00 Numerosta : 0200-555 57 Teknisk Support D-Link Teknisk Support via Internet: http://dlink.com D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08:00 - 17:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://dlink.com e-mail: soporte@dlink.es Τεχνική Υποστήριξη D-Link Hellas Support Center http://dlink.com Καλύμνου 12, 112 51, Αθήνα Τηλ. 213 0020353 (Δευτέρα - Παρασκευή, 09.
Tehnička podrška Hvala vam na odabiru D-Link proizvoda. Za dodatne informacije, podršku i upute za korištenje uređaja, molimo vas da posjetite D-Link internetsku stranicu na www.dlink.eu http://dlink.com Tehnična podpora Zahvaljujemo se vam, ker ste izbrali D-Link proizvod. Za vse nadaljnje informacije, podporo ter navodila za uporabo prosimo obiščite D-Link - ovo spletno stran www.dlink.eu http://dlink.com Suport tehnic Vă mulţumim pentru alegerea produselor D-Link.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: +91-22-27626600 Toll Free 1800-22-8998 Web: www.dlink.co.in E-Mail: helpdesk@dlink.co.in Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.dlink.com.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest St. , Argentine Sq. , Tehran IRAN Postal Code : 1513833817 Tel: +98-21-88880918,19 +98-21-88706653,54 General Inquiries: info.ir@dlink-me.com Tech Support: support.ir@dlink-me.com Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337 Casablanca , Maroc Phone : +212 663 72 73 24 Email: support.na@dlink-me.
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: 8-800-700-5465 Техническая поддержка через Интернет: http://www.dlink.ru e-mail: support@dlink.ru Офисы Россия 129626 г. Москва Графский пер., 14 Тел.: +7 (495) 744-0099 Украина, 04080 г.
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.
D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題,台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 手機付費電話 (02)6600-0123#8715 服務時間:週一至週五,早上9:00到晚上9:00 (不含周六、日及國定假日) 網 站:http://www.dlink.com.tw 電子郵件:dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶,請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢,請參考以下網頁說明: http://www.dlink.com.
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.
技术支持 办公地址:北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话:400-629-6688 技术支持中心传真:(028) 87300889 各地维修中心地址请登陆官方网站查询 网址:http://www.dlink.com.cn 400电话工作时间:工作日9:00-19:00;节假日9:00-18:00.
Registration Card All Countries and Regions Excluding USA Print, type or use block letters. Your name: Mr./Ms_____________________________________________________________________________ Organization: ________________________________________________ Dept.